Product ID:GYLPTAL ID:1201
MSDS Date:11/01/1985
FSC:8010
NIIN:00-133-5706
MSDS Number: BHMFG

GLYPTAL, INC.

305 EASTERN AVENUE
CHELSEA, MA 02150
US

Emergency Phone: 617-884-6918

Cage: DO306

GLYPTAL, INC.

NONE CHELSEA, MA 02150 US

Telephone: 617-884-6918

Cage: DO306

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 34.4%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 5.6%

OSHA PEL 100 PPM

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 17%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:XYLENE CONTAINED IN THIS MATERIAL HAS
BEEN FOUND TO CAUSE THE FOLLOWING EFFECTS IN LABORATORY ANIMALS.
AMENIA, LIVER ABNORMALITIES, KIDNEY DAMAGE, EYE DAMAGE.
Effects of Overexposure:PRIMARY IRRITATION TO SKIN AND EYES;
ANESTHETIC, RESPIRATORY IRRITATION, DIZZI- NESS, HEADACHE,
UNCONSCIOUSNESS.

First Aid:EYE: FLUSH EIHT COPIOUS AMOUNTS OF WATER, SEE PHYSICIAN
SKIN: WASH THOROUGHLY WITH SOAP AND WATER. USE
HAND LOTION INHAL: REMOVE TO FRESH AIR,
ADMINISTER O XYGEN IF NECESSARYINGST: CONSULT A PHYSICIAN
IMMEDIATELY

Flash Point:72F/22.22C
Lower Limits:1.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM OR WATER SPRAY
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS WITH
POSITIVE PRESSURE MODE SHOULD BE WORN. WATER SHOULD BE USED TO
KEEP FIRE CONTAINERS COOL TO REDUCE PRESSURE.
Unusual Fire/Explosion Hazard:EXPLOSION HAZARD IN CONTAINERS DUE TO
PRESSURE BUILD UP DUE TO HEAT. USE WATER TO KEEP CONTAINERS COOL.

Spill Release Procedures:USE AN ABSORBENT MATERIAL SUCH AS VERMICULITE
TO REMOVE SPILLED MATERIALS.SOLVENTS MAY BE DISTILLEDOFF AND
REMOVED.

Handling and Storage Precautions:STORE IN A COOL, WELL VENTILATED AREA.
GROUND CONTAINERS AND TRANSFER VESSELS. KEEP FREE FALL OF LIQ TO A
FEW INCHES TO AVOID BUILD UP OF STATIC ELEC.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
VAPORS. AVOID PROLONGED CONTACT WITH SKIN.

Respiratory Protection:USE APPROVED SELF CONTAINED RESPIRATORS IN
CONFINED AREAS.
Ventilation:SOLVENT VAPORS SHOULD BE REMOVED BY DILUTION VENTILATION
FROM LOWER LEVELS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:AS REQUIRED TO AVOID SKIN CONTACT.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:242-287F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:56.1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE MAY BE FORMED BY
INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:EXCESSIVE HEAT, SPARKS, OR OPEN
FLAME

Waste Disposal Methods:DISPOSE OF WASTE PAINT & STILL RESIDUE AS
IGNITIBLMATERIAL D001, FOLLOWING ALL FEDERAL, STATE, AND LOCAL
REGUALTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.